User Tools

Site Tools


feeds_speeds_and_bits

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
feeds_speeds_and_bits [2019/02/18 09:23]
mattf
feeds_speeds_and_bits [2019/02/18 09:24] (current)
mattf
Line 3: Line 3:
 Generally feeds and speeds are the focus of all CNC machining. From laser cutting to CNC routing, plasma cutting and even 3d printing; the right feeds and speeds give you the best part quality results as well as keep our machines in good condition. Generally feeds and speeds are the focus of all CNC machining. From laser cutting to CNC routing, plasma cutting and even 3d printing; the right feeds and speeds give you the best part quality results as well as keep our machines in good condition.
  
-KL1212 feeds and speeds+===== KL1212 ​feeds and speeds ​=====
  
 ^Bits^Feed^Spindle speed^Material used| ^Bits^Feed^Spindle speed^Material used|
-|1/​4" ​ Single flute plastic Bit - [[https://​www.toolstoday.com/​v-14148-51413-k.html|tools today]]|100 ipm|10,​000(unverified)|Gator board (structural foam core)|+|1/4" Single flute plastic Bit - [[https://​www.toolstoday.com/​v-14148-51413-k.html|tools today]]|100 ipm|10,​000(unverified)|Gator board (structural foam core)|
 | | | | | | | | | |
 | | | | | | | | | |
feeds_speeds_and_bits.txt ยท Last modified: 2019/02/18 09:24 by mattf