User Tools

Site Tools


enco_bridgeport_model_100-1529

Enco CNC Milling Machine

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Aliquam cursus at sapien quis pulvinar. Donec eu accumsan velit. Sed pretium, tellus quis rhoncus lobortis, libero sem lobortis enim, non pharetra nulla neque sed ipsum. Sed at metus nec metus convallis malesuada eu rutrum massa. Aliquam volutpat ultricies mi suscipit convallis. Integer at purus ac libero luctus condimentum. Vestibulum in turpis id nisl pharetra blandit.

Certification is required to use this piece of equipment. DO NOT use this machine unless a teacher has instructed you in its safe use and operation and has given you permission

General Info

Make: ENCO
Model: 100-1529
Serial: Serial
Manual: Manual
Photo:

Safety Checks

Requirements

Safety glasses must be worn. Close protective clothing must be worn.
Close toed protective footwear must be worn. Long and loose hair must be contained.
Dusk mask must be used when excessive airborne particulates and/or fumes are created Hearing protection must be worn above 85dB.
Rings and jewelry must NOT be worn. Gloves must NOT be worn while using this machinery.

Pre-Operational Safety Checks

  • Ensure no slip/trip hazards are present in workspaces and walkways.
  • Locate and ensure you are familiar with the operation of the ON/OFF switch and E-Stop (when available).
  • Do not leave equipment on top of the machine.
  • Check that machine guards are in position.
  • Ensure cutter is in good condition and securely mounted.
  • Check coolant delivery system to allow for sufficient flow of coolant.
  • Faulty equipment must not be used. Immediately report suspect machinery.

Operational Safety Checks

  • Keep clear of moving machine parts.
  • Never leave the machine running unattended.
  • Follow correct clamping procedures- keep overhangs as small as possible and check work piece is secure.
  • Set the correct speed to suit the cutter diameter, the depth of cut and the material.
  • Before making adjustments and measurements or before cleaning swarf accumulations switch off and bring the machine to a complete standstill.

Usage

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Aliquam cursus at sapien quis pulvinar. Donec eu accumsan velit. Sed pretium, tellus quis rhoncus lobortis, libero sem lobortis enim, non pharetra nulla neque sed ipsum. Sed at metus nec metus convallis malesuada eu rutrum massa. Aliquam volutpat ultricies mi suscipit convallis. Integer at purus ac libero luctus condimentum. Vestibulum in turpis id nisl pharetra blandit.

Maintenance

More Learning

Supporting Equipment

Tool Type Make / Model / Link
Support Tool Supporting Equipment Page

Equipment Status

For the availability and current status of this equipment, please see the parent area wiki page.

Primary Consumables

Consumable Part Number Product Link
Consumable TBD TBD
enco_bridgeport_model_100-1529.txt · Last modified: 2016/05/09 13:29 by jmangan