User Tools

Site Tools


Tektronix TBS 1104 Digital Oscilloscope


  • 100 MHz Bandwidth
  • 4-channel
  • Up to 1 GS/s Sample Rate on All Channels
  • 2.5k point Record Length on All Channels
  • Advanced Triggers including Pulse Width Trigger and Line-selectable Video Trigger
  • 16 Automated Measurements, and FFT Analysis for Simplified Waveform Analysis
  • Built-in Waveform Limit Testing
  • Automated, Extended Data Logging Feature
  • Probe Check Wizard

General Info

Make: Tektronix
Model: TBS-1104
Serial: C012645
Manual: TBS1000 Series Manual


Basics of 1000 series oscilloscopes. The video shows a 2 channel unit but is otherwise the same.


No maintenance required, however prior to use check probes for damage and measure the 5V output(see pic below) of scope for correct reading. Correct reading will be a 1KHz 0-5V square wave. If correct reading is not shown check setup and retry. If still bad give probe to shop lead.

More Learning

Equipment Status

For availability and current status of this equipment, please see Tools Inventory, or the parent area under which this tool is maintained.

electronics_tools_tbs1104.txt · Last modified: 2016/08/20 10:28 by jmangan